EcoAqua Fridge Filter - 847200 - Suits Fisher & Paykel
Home Users - Please Click here to shop online for Fisher & Paykel fridge filters.
The EcoAqua EFF-6049A is a quality replacement water filter cartridge to suit all Fisher & Paykel Activesmart Integrated refrigerator models. This filter removes unwanted contaminants from your water supply to ensure that your refrigerator water and ice is clean and tastes great.
If your Product Code starts with a 25xxx, you will need to order this filter. The 847200 and 847200-2 will also suit your fridge.
If your Product Code starts with a 24xxx, you will need to order the 836848 filter. The FPEXT, FPEXT-2, and the EFF-6017A filters will also suit your fridge.
This filter removes:
- 99% of chlorine taste and odour
- 99% of chloramine taste and odour
- 99.99% of cysts
- 97% of mercury
- 99% of asbestos
- 98% of lead
Technical Specifications:
- Capacity: 386 litres
- Temperature: 0.6 - 38 degrees Celsius
- Pressure: 25-120 psi
- Flow Rate: 1.89 Lpm
- Filter Life: Every 6 months or when the "Change Filter" light comes on.
- NSF/ANSI Certified: Standard 42, 53, and 401.
- Micron Rating: 1 Micron
The EFF-6049A is compatible with the following Fisher & Paykel refrigerators:
- All RS9120W Activesmart Integrated Refrigerator Models
- RS9120WRJ1
- RS9120WLJ1
- RS9120WRU1
Installation:
The filter is located internally at the top right hand corner of your refrigerator.
- Open your refrigerator and locate the filter cover on the back wall, top right off your fridge.
Note: We recommend removing the below shelf for ease of install. - Hold the base of the filter firmly and pull towards yourself.
- Turn the filter anti- clockwise until it releases from the filter head.
- Pull out the filter to remove it from the filter head. (it is expected that a small amount of water will drip after you remove the filter)
- Discard the old filter.
- Remove the plastic wrapping of the new filter
- Insert the filter into the filter head.
- Push the filter firmly all the way into the filter head then turn the filter clockwise until it locks into place
- Push the entire filter back into the bracke
- Push the cover up and into the slots at the top of the filter housing until, it clicks and the base locks firmly in place.
After installation, flush the water filter.
Run the water until any air bubbles or excess carbon is released.
For External Filter Fridge Models
The filter is located external to the fridge, with a head being connected to the tubing at the back of your fridge.
- Turn off the water supply.
- Twist the old filter quarter-turn counter-clockwise.
- Pull the filter staight down and discard.
- Push filter up into filter head and turn clockwise until it stops.