Fisher & Paykel Replacement Fridge Filter - 847200-2
PART
847200-2
UPC: 794712363422
Home Users - Please Click here to shop online for Fisher & Paykel fridge filters.
The 847200-2 water filter cartridge is a quality replacement to suit all Fisher & Paykel Activesmart Integrated refrigerator models. This filter removes unwanted contaminants from your water supply to ensure that your refrigerator water and ice is clean and tastes great.
This filter removes:
- 99% of chlorine taste and odour
- 99% of chloramine taste and odour
- 99.99% of cysts
- 97% of mercury
- 99% of asbestos
- 98% of lead
Technical Specifications:
- Capacity: 386 litres
- Temperature: 0.6 - 38 degrees Celsius
- Pressure: 25-120 psi
- Flow Rate: 1.89 Lpm
- Filter Life: Every 6 months or when the "Change Filter" light comes on.
- NSF/ANSI Certified: Standard 42, 53, and 401.
- Micron Rating: 1 Micron
The 847200-2 is compatible with the following Fisher & Paykel refrigerators:
- All RS9120W Activesmart Integrated Refrigerator Models
- RS9120WRJ1
- RS9120WLJ1
- RS9120WRU1
Installation:
For Fridge Models - RF605Q/RF523G/RF523M
Removing The Old Filter:
The filter is located internally at the top right hand corner of your refrigerator.
- Open your refrigerator and locate the filter cover on the back wall, top right off your fridge.
Note: We recommend removing the below shelf for ease of install. - Hold the base of the filter firmly and pull towards yourself.
- Turn the filter anti- clockwise until it releases from the filter head.
- Pull out the filter to remove it from the filter head. (it is expected that a small amount of water will drip after you remove the filter)
- Discard the old filter.
Installing the new filter
- Remove the plastic wrapping of the new filter
- Insert the filter into the filter head.
- Push the filter firmly all the way into the filter head then turn the filter clockwise until it locks into place
- Push the entire filter back into the bracket
- Push the cover up and into the slots at the top of the filter housing until, it clicks and the base locks firmly in place.
IMPORTANT!
After installation, flush the water filter.
Run the water until any air bubbles or excess carbon is released.
For External Filter Fridge Models
The filter is located external to the fridge, with a head being connected to the tubing at the back of your fridge.
- Turn off the water supply.
- Twist the old filter quarter-turn counter-clockwise.
- Pull the filter staight down and discard.
- Push filter up into filter head and turn clockwise until it stops.
UPC: 794712363422
Related Products