Shower Filter Replacement Cartridge
PART
SF100-848C
Removes Chlorine, Sediment, and Rust for up to 4 months. Reduces the build-up of soap scum - so you'll spend less time cleaning the shower. Say goodbye to dry skin and stop smelling like you just climbed out of the pool! Highly recommended for mains pressure water supply.
Specifications
- Max temp 80°C
- Max pressure 100 psi
- 'Dimensions 99 x 70 cm
- Service life 4 months (cartridge) /12 months (whole housing unit)
- Materials: Anisotropic Ferrite Magnet, carbon, calcium sulphite, ceramic ball and KDF
Cartridge Replacement
- Unscrew the connections on the inlet and outlet of the filter.
- Unscrew the top of the casing and remove the old cartridge.
- Replace the internal O-Ring (larger) in the casing with the one provided with the cartridge. Ensure the O-ring is positioned correctly in the groove.
- Place the O-ring (smaller) on the top of your new cartridge.
- Insert the new cartridge – with the O-ring at the top and screw the casing firmly together. Do not overtighten.
- ‘Flush’ your filter by running water from a tap through both ends.
- If Teflon Tape was used for installation, remove any old Tape from the threads and re-apply.
- Screw both ends onto your shower connections ensuring the correct flow direction through the filter. DO NOT OVER TIGHTEN.
Note: Pressure limiting valve should always be installed at mains pressure prior to filter.