Fisher and Paykel Fridge Filter 847201-2
For Fisher & Paykel fridge filters, please confirm your filter or fridge part number. If you aren't sure which filter is correct, please contact our friendly team.
The 847201-2 water filter cartridge is a quality replacement to suit some Fisher & Paykel Activesmart Integrated refrigerator models. This filter removes unwanted contaminants from your water supply to ensure that your refrigerator water and ice is clean and tastes great.
This filter removes:
- 99% of chlorine taste and odour
- 99% of chloramine taste and odour
- 99.99% of cysts
- 97% of mercury
- 99% of asbestos
- 98% of lead
Technical Specifications:
- Filter Life: Every 6 months or when the "Change Filter" light comes on.
The 847201-2 is compatible with the following Fisher & Paykel refrigerators:
- RF523GDUX1
- RF523MLDUX1
- RF523MRDUX1
Installation for Internal Filter
The filter is located internally at the top right hand corner of your refrigerator.
- Open your refrigerator and locate the filter cover on the back wall, top right off your fridge.
Note: We recommend removing the below shelf for ease of install. - Hold the base of the filter firmly and pull towards yourself.
- Turn the filter anti- clockwise until it releases from the filter head.
- Pull out the filter to remove it from the filter head. (It is expected that a small amount of water will drip after you remove the filter)
- Discard the old filter.
- Remove the plastic wrapping of the new filter
- Insert the filter into the filter head.
- Push the filter firmly all the way into the filter head then turn the filter clockwise until it locks into place
- Push the entire filter back into the bracket
- Push the cover up and into the slots at the top of the filter housing until, it clicks and the base locks firmly in place.
Run the water until any air bubbles or excess carbon is released.
For External Filter Fridge Models
The filter is located external to the fridge, with a head being connected to the tubing at the back of your fridge.
- Turn off the water supply.
- Twist the old filter quarter-turn counter-clockwise.
- Pull the filter staight down and discard.
- Push filter up into filter head and turn clockwise until it stops.
Please Note: It is not necessary to shut off the water supply when installing this water filter.
Please Note: If you have any questions, you can use the chat module at the bottom left of your screen to send us a message. Alternatively, you can also email us or chat with us over the phone. Our experienced, friendly, and Australian-based sales team are always happy to help.